I have hooked everything up according to the directions, to the best of my knowlege. I did not hook up the brown, blue, or yellow-black, wires. I programmed and I get the point where it does the 10x yellow flashes then it does nothing else. All lights turn off until I remove the key and the blue light stays solid. It does not start. Am I missing something?
After this did not work I tried hooking up the three wires, I grounded black-yellow, hooked blue to the pink-black on 20 pin connector, and brown to the grey-green at light control module.
I have the Evo-All and the Wire Harness(thar gm1 I believe is what it is called). Please help.
Thank You,
C